wir haben opsi für die automatische Windows-Installation via PXE konfiguriert und das ganze hatte für die betroffene Hardware bereits funktioniert. Seit dem sind wir uns keiner Änderungen bewusst; leider funktioniert die Installation jetzt nicht mehr.
Hardware: DELL Latitude 5530
Opsi-Version: 4.2
Das Verhalten ist folgendes:
Wenn ich das netboot-Produkt (Windows10) auf Setup setze, startet der Client wie gewünscht in das opsi-bootimage und formatiert und kopiert winpe.
Dann startet der Laptop neu und sollte in WinPE booten, das funktioniert aber nicht und wir landen wieder im PXE-Boot.
Im UEFI gibt es auch keinen Eintrag für die SSD im Bootorder-Menü.
Anbei die meiner Meinung nach relevanten Logzeilen:
Code: Alles auswählen
[...]
(6369) [5] [2024-02-22 11:43:00.931] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(6417) [5] [2024-02-22 11:43:00.971] [ ] Disk order: (<string>:68)
[...]
(6444) [5] [2024-02-22 11:43:00.976] [ ] - /dev/nvme0n1 (rotational? False) (sizeG 476) (uuid 5149e836) (<string>:70)
(6445) [5] [2024-02-22 11:43:00.976] [ ] Normally we using disk 0 (setup.py:586)
[...]
(6584) [5] [2024-02-22 11:43:01.135] [ ] multi_disk_mode is 0 - so we use disk number: 0 uuid:5149e836 (setup.py:589)
(6585) [5] [2024-02-22 11:43:01.135] [ ] Using disk device /dev/nvme0n1 (setup.py:591)
(6586) [5] [2024-02-22 11:43:01.135] [ ] Check if disk /dev/nvme0n1 is ssd or classic (rotational) HD (<string>:75)
(6587) [5] [2024-02-22 11:43:01.136] [ ] Disk /dev/nvme0n1 is not rotational (SSD) (<string>:91)
[...]
(6660) [5] [2024-02-22 11:43:01.154] [ ] Clear first 512 bytes on /dev/nvme0n1 to remove grub and so on ... (setup.py:970)
(6665) [5] [2024-02-22 11:43:03.167] [ ] using sgdisk to clear not usable partition table of /dev/nvme0n1 (setup.py:988)
(6689) [5] [2024-02-22 11:43:04.263] [ ] unrecognized partition table type, writing empty partitiontable (Posix.py:1525)
(6725) [5] [2024-02-22 11:43:04.291] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(6732) [5] [2024-02-22 11:43:04.299] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(6745) [5] [2024-02-22 11:43:04.307] [ ] Write Master Boot Record (setup.py:995)
(6773) [5] [2024-02-22 11:43:04.348] [ ] Create system partition on /dev/nvme0n1p1 start: 0M, size: 483386M (<string>:263)
(6851) [5] [2024-02-22 11:43:06.743] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(6858) [5] [2024-02-22 11:43:06.751] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(6866) [5] [2024-02-22 11:43:06.759] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(6873) [5] [2024-02-22 11:43:06.767] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(6902) [5] [2024-02-22 11:43:06.785] [ ] /dev/nvme0n1p1 exists as device - fine (<string>:248)
(6903) [5] [2024-02-22 11:43:06.789] [ ] Partition /dev/nvme0n1p1 has a correct block alignment (<string>:154)
(6904) [5] [2024-02-22 11:43:06.790] [ ] Create file system ntfs on partition system (/dev/nvme0n1p1) (<string>:339)
(6923) [5] [2024-02-22 11:43:21.961] [ ] /dev/nvme0n1p1 exists as device - fine (<string>:329)
(6924) [5] [2024-02-22 11:43:21.961] [ ] /dev/nvme0n1p1 created and formated (<string>:365)
(6925) [5] [2024-02-22 11:43:21.961] [ ] Check winpe partition (setup.py:1064)
(6926) [5] [2024-02-22 11:43:21.962] [ ] Check winpe partition at number 2 (setup.py:1066)
(6927) [5] [2024-02-22 11:43:21.963] [ ] Create winpe partition on /dev/nvme0n1p2 start: 484386M, size: 4000M (<string>:263)
(7011) [5] [2024-02-22 11:43:24.475] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(7018) [5] [2024-02-22 11:43:24.483] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(7026) [5] [2024-02-22 11:43:24.491] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(7033) [5] [2024-02-22 11:43:24.499] [ ] geometryLine : /dev/nvme0n1: 488386 cylinders, 64 heads, 32 sectors/track (Posix.py:1557)
(7075) [5] [2024-02-22 11:43:24.533] [ ] /dev/nvme0n1p2 exists as device - fine (<string>:248)
(7076) [5] [2024-02-22 11:43:24.541] [ ] Partition /dev/nvme0n1p2 has a correct block alignment (<string>:154)
(7077) [5] [2024-02-22 11:43:24.543] [ ] /dev/nvme0n1p2 exists as device - fine (<string>:248)
(7078) [5] [2024-02-22 11:43:24.550] [ ] Partition /dev/nvme0n1p2 has a correct block alignment (<string>:154)
(7079) [5] [2024-02-22 11:43:24.553] [ ] /dev/nvme0n1p2 is not mounted (<string>:452)
(7080) [5] [2024-02-22 11:43:24.553] [ ] Create file system ntfs on partition winpe (/dev/nvme0n1p2) (<string>:339)
(7100) [5] [2024-02-22 11:43:39.653] [ ] /dev/nvme0n1p2 exists as device - fine (<string>:329)
(7101) [5] [2024-02-22 11:43:39.653] [ ] /dev/nvme0n1p2 created and formated (<string>:365)
(7102) [5] [2024-02-22 11:43:39.653] [ ] Write Master Boot Record (setup.py:1250)
(7147) [5] [2024-02-22 11:43:46.735] [ ] collect disk and partition infos (setup.py:1284)
[...]
(7170) [5] [2024-02-22 11:43:46.739] [ ] we have uuid b2ca50aa on /dev/nvme0n1 (setup.py:1286)
(7178) [5] [2024-02-22 11:43:46.755] [ ] We save all partition infos .... (setup.py:1330)
(7179) [5] [2024-02-22 11:43:46.755] [ ] Check if disk /dev/nvme0n1 is raid member (<string>:129)
(7180) [5] [2024-02-22 11:43:46.759] [ ] Disk /dev/nvme0n1 is no (Soft/Fake) Raid Member (<string>:144)
[...]
(7203) [5] [2024-02-22 11:43:46.760] [ ] Check if disk /dev/nvme0n1 is raid HD (<string>:97)
(7204) [5] [2024-02-22 11:43:46.760] [ ] Disk /dev/nvme0n1 is no (Soft/Fake) Raid (<string>:123)
(7221) [5] [2024-02-22 11:43:46.767] [ ] has disk /dev/nvme0n1 a gpt partition table ? (setup.py:1343)
(7222) [5] [2024-02-22 11:43:46.771] [ ] disk /dev/nvme0n1 have no gpt partition table (setup.py:1346)
(7223) [5] [2024-02-22 11:43:46.771] [ ] We have 2 partitions on disk /dev/nvme0n1 (setup.py:1359)
(7224) [4] [2024-02-22 11:43:46.775] [ ] Warning 'subprocess 913 is still running' in file 'subprocess.py', line 1072 (logging.py:848)
(7236) [4] [2024-02-22 11:43:46.776] [ ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '/tmp/setup.py', line 1360 (logging.py:848)
(7246) [5] [2024-02-22 11:43:46.776] [ ] We have uuid b2ca50aa on disk /dev/nvme0n1 (setup.py:1361)
[...]
(7363) [5] [2024-02-22 11:43:46.808] [ ] mount winpe partition (setup.py:1416)
(7364) [5] [2024-02-22 11:43:46.808] [ ] mountpoint /mnt/hd exists (<string>:408)
(7365) [5] [2024-02-22 11:43:46.808] [ ] mountpoint /mnt/hd >> /dev/null 2>&1 (<string>:413)
(7366) [5] [2024-02-22 11:43:46.810] [ ] Nothing mounted on /mnt/hd - fine (<string>:428)
(7367) [5] [2024-02-22 11:43:46.811] [ ] /dev/nvme0n1p2 is not mounted (<string>:452)
(7372) [5] [2024-02-22 11:43:46.821] [ ] mount -t ntfs /dev/nvme0n1p2 /mnt/hd (<string>:468)
(7373) [5] [2024-02-22 11:43:51.847] [ ] /dev/nvme0n1p2 mounted on /mnt/hd - fine.. (<string>:476)
(7842) [5] [2024-02-22 11:44:01.256] [ ] we do not copy the uefi boot files because we are not in uefi mode (setup.py:1426)
[...]
(8467) [5] [2024-02-22 11:44:06.274] [ ] installing drivers from win10-x64-bls/drivers (setup.py:1498)
[...]
(12168) [5] [2024-02-22 11:45:04.474] [ ] Creating work.cmd (setup.py:1508)
(12504) [5] [2024-02-22 11:45:05.183] [ ] Adding found driver c:\drv\53\oem203.inf to drvloadlist_org.txt
(setup.py:1559)
(12524) [5] [2024-02-22 11:45:05.219] [ ] Here comes the /mnt/hd/opsi/drvloadlist_org.txt (setup.py:1567)
(12536) [5] [2024-02-22 11:45:05.274] [ ] Creating startnet.cmd (setup.py:1611)
(12537) [5] [2024-02-22 11:45:05.275] [ ] Creating diskpart.txt to delete winpe (setup.py:1643)
(12538) [5] [2024-02-22 11:45:05.275] [ ] No Partition IDs to backup - do not create /mnt/hd/opsi/partunhide.txt (setup.py:1686)
(12539) [5] [2024-02-22 11:45:05.275] [ ] No Partition IDs to backup - do not create /mnt/hd/opsi/parthide.txt (setup.py:1707)
(12540) [5] [2024-02-22 11:45:05.275] [ ] write disk and partition infos to /mnt/hd/opsi/diskinfo.ini (setup.py:1713)
(12541) [5] [2024-02-22 11:45:05.275] [ ] Here comes the /mnt/hd/opsi/diskinfo.ini (setup.py:1718)
(12580) [5] [2024-02-22 11:45:05.291] [ ] Creating opsi-script-infos.ini (setup.py:1728)
(12581) [5] [2024-02-22 11:45:05.292] [ ] Patching unattend.xml and config.ini (setup.py:1752)
(12642) [5] [2024-02-22 11:45:06.623] [ ] Here comes the unattend.xml (setup.py:1758)
(12893) [5] [2024-02-22 11:45:06.640] [ ] Reading config.ini data: config_service.url: https://172.20.21.4:4447/rpc (setup.py:1775)
(12894) [5] [2024-02-22 11:45:06.640] [ ] config_service.url from clientconfig: https://172.20.21.4:4447/rpc (setup.py:1776)
(12951) [5] [2024-02-22 11:45:07.079] [ ] diskcounter is still 0 (setup.py:1833)
(12952) [5] [2024-02-22 11:45:07.079] [ ] Set to setup bls_gen-local-admin-pw (<string>:1115)
(12956) [5] [2024-02-22 11:45:07.243] [ ] Set to setup windomain-bls (<string>:1115)
(12962) [5] [2024-02-22 11:45:07.464] [ ] Script execution successful (run-master:2033)
(13316) [5] [2024-02-22 11:45:07.521] [ ] Writing log to service (run-master:2107)
Was geht hier schief? Die Zeile
Code: Alles auswählen
(7842) [5] [2024-02-22 11:44:01.256] [ ] we do not copy the uefi boot files because we are not in uefi mode (setup.py:1426)
Hat dazu jemand eine Idee?
Danke!